Epson LQ 630S, Справочное руководство

Страница: 47 / 160

Control Panel
41
3
3
3
3
3
3
3
3
3
3
3
3
About Your Printer’s Default Settings
The default settings control many printer functions. While you
can often set these functions through your software or printer
driver, you may sometimes need to change a default setting from
the printer’s control panel using the default-setting mode.
For a detailed description of the settings you can change in the
default-setting mode, see “Understanding default settings” on
page 41. For instructions on changing the settings, see “Changing
default settings” on page 47.
Understanding default settings
This section describes the settings and options available in the
default-setting mode. These settings are shown in the following
table and explained in detail after the table.
To access and change a setting, see “Changing default settings”
on page 47.
Default-setting mode
Setting Options (default in bold)
Page length for tractor Length in inches: 3, 3.5, 4, 5.5, 6, 7, 8, 8.5,
11 , 70/6, 12, 14, 17
Skip over perforation Off , On
Auto tear-off Off , On
Auto line feed Off , On
Print direction Bi-D , Uni-D, Auto
Software ESC/P2 , IBM PPDS
0 slash 0 , (the zero character with a slash)
High speed draft Off, On
I/F (interface) mode Auto , Parallel,* Serial,** USB
Auto I/F (interface) wait time 10 seconds , 30 seconds
Parallel I/F (interface)
bidirectional mode* Off, On