Epson LightScene EV-110 Скачать руководство пользователя страница 179

Страница: 179 / 210

179

Solutions to Remote Control Problems

If the projector does not respond to remote control commands, try the following solutions:

• Check that the remote control batteries are installed correctly and have power. If necessary, replace

the batteries.

• Make sure you are operating the remote control within the reception angle and range of the projector.

• Make sure the projector is not warming up or shutting down.

• Check to see if a button on the remote control is stuck down, causing it to enter sleep mode. Release

the button to wake the remote control up.

• Strong fluorescent lighting, direct sunlight, or infrared device signals may be interfering with the

projector's remote receivers. Dim the lights or move the projector away from the sun or interfering
equipment.

• If available, turn on the remote receiver in the projector's menu system, or check if the remote receiver

was turned off.

• If the remote receiver setting is off, press and hold the

Menu

button on the remote for at least 15

seconds to restore the default setting.

• If you assigned an ID number to the remote control to operate multiple projectors, you may need to

check or change the ID setting (feature not available with all projectors). If you press

ID > 0

on the

remote it should communicate with all projectors.

• If you lose the remote control, you can purchase another from an authorized Epson reseller.

Parent topic:

Solving Projector or Remote Control Operation Problems

Related references

Projector Feature Settings - Settings Menu
Remote Control Operation

Related tasks

Replacing the Remote Control Batteries

Solutions When a Battery Message Appears

If you see a message telling you that the battery that saves your clock settings is running low, contact
Epson for help.

Parent topic:

Solving Projector or Remote Control Operation Problems

Содержание LightScene EV-110



















































































































































































































Результаты поиска

Содержание LightScene EV-110

Отзывы:

Похожие инструкции для LightScene EV-110

Бренды по названию

Популярные бренды

Epson LightScene EV-110, Руководство пользователя

Результаты поиска

Содержание LightScene EV-110

Отзывы:

Похожие инструкции для LightScene EV-110

Бренды по названию

Популярные бренды