130
Depending on the signals from the sensors, you can execute one of the following projector operations
that you have already selected in the projector's menu:
•
Power On
/
Power Off
•
Execute A/V Mute
/
Release A/V Mute
•
Start Playlist
/
Stop Playlist
•
Source Select
•
Light Source Mode: Normal
/
Light Source Mode: Quiet
See the
EV-115/EV-110 External Sensors Setup Guide
for details.
Caution:
Incorrect connection could damage the product. Contact a qualified technician to connect the
external sensor device.
Note:
Up to two sensors are available at the same time. You can also select settings for a combination
of two signals. You need to process the sensor cable so that you can connect it to the
DC Out
(2.0A)/GPI In
port. Or, you can use a commercially available connector instead. You can also connect
other external devices such as buttons and switches.
1.
Connect external sensors to the
DC Out (2.0A)/GPI In
port.
2.
Press the
Menu
button on the remote control, select the
Extended
menu, and press
Enter
.
3.
Select
DC Out (2.0A)/GPI In
and press
Enter
.
4.
Select
Always On/On
as the
DC Out/GPI In
setting.
5.
Select
GPI-1 Settings
.
6.
Select the
Low -> High
setting, and then select one of the following operations to be executed when
the sensor signal exceeds a certain voltage:
•
Power On
/
Power Off
to turn the projector on or off.
•
Execute A/V Mute
/
Release A/V Mute
to enable or disable
A/V Mute
.
•
Start Playlist
/
Stop Playlist
to start or stop playing your playlist from
Favorite Playlists
. You also
need to select the target playlist in the
Favorite Playlists
setting.
•
Source Select
to switch the image source. You also need to select the target source in the
Source
setting.
•
Light Source Mode: Normal
/
Light Source Mode: Quiet
to switch the
Light Source Mode
setting.
Содержание LightScene EV-110
Страница 1: ...LightScene EV 110 115 User s Guide ...
Страница 2: ......
