Page 8 of 10 Last Modified: 3/22/2010
Shutting Down the LCD Projector
To turn off, push the red
Power
button. You will see
a confirmation message.
Press
Power
again to turn off
the projector.
Note:
After turning off the
power to the projector, wait
until the fan turns off before
unplugging it. Once the
Power
Light
stops flashing,
and stays on, it is safe to
unplug the projector.
Warning Lights
Next to the
Power Light
are two additional warning lights. Take notice if any of these
lights appear.
If the
Lamp Warning Light
is flashing, notify the ITRC that the lamp needs to be
changed.
If the
Temperature Status Light
is flashing orange, notify the ITRC to clean the air
filter. If the
Temperature Status Light
is flashing red, turn off the lamp immediately,
and allow the fan to run to cool down the temperature.
Further Information
If you are having trouble with audio or video, first select the
Help
option on the remote
or on the projector’s control panel. For specific questions or for troubleshooting, see the
User’s Guide. On the Internet you can reach Epson’s support page at
http://support.epson.com
or
http://www.presentersonline.com
. You can also contact the
ITRC by phone (282-5880) or email at [email protected]. The ITRC suggests attending a
workshop on the operation of the LCD projector. For information regarding ITRC
workshops dates and registration, visit the ITRC website, at
http://www.isu.edu/itrc/
.
.
