Page 7 of 10 Last Modified: 3/22/2010
Video:
RCA A/V Cable: Connect the projector to an external video player. Connect A/V
cable (with yellow plug) to the
Video-out
jack on your video source. Connect the
audio parts of the cable into the
Audio
jacks (red and white) under
Audio 2
on the
projector, and to the corresponding jacks on your video source.
S-Video:
Insert one end of the S-Video cable into the
S-Video
connector, and the other end into
the
S-Video output
port of the video source. Use the A/V cable if needed to connect
RCA audio.
Audio Out:
This will allow you to connect the projector’s speakers to external speakers. Connect
an RCA-to-3.5 mm stereo audio cable’s 3.5 mm stereo miniplug into the projector’s
audio out
jack. Connect the RCA plugs to the jacks of the speaker or PA system.
Monitor Out:
This will allow you to connect your desktop computer to the projector in order to
view both the projected image and the computer screen. Disconnect the monitor
cable from your computer and connect it to the projector’s
Monitor Out
port. This
will also require connection of a computer cable into the projector’s
Computer
2/Component Video
port. Connect the other end of the cable into your computer’s
video port.
