Light status
Condition/solution
The ink pads need to be replaced. You must contact Epson for support.
The
ink light is flashing
The
light is flashing
An error has occurred during firmware updating. Connect your product
The
ink light is on
using a USB cable and try updating the firmware again. If the error
The
paper light is on
continues, contact Epson for support.
Open the scanner unit and remove any paper or protective materials
The
power light is flashing
inside the printer. Turn the product off and then back on again.
The
ink light is flashing
The
paper light is flashing
Parent topic:
Related references
Paper Jam Problems
Where to Get Help
Related tasks
Related topics
Running a Product Check
Running a product check helps you determine if your product is operating properly.
1.
Press the
power button to turn the product off.
2.
Disconnect any interface cables connected to your product.
3.
Load plain paper in the product.
4.
Hold down the
stop button and press the
power button to turn the product on.
5.
When the product turns on, release both buttons.
The product begins printing a nozzle check pattern.
6.
Do the following, depending on the results of the product check:
• If the page prints and the nozzle check pattern is complete, the product is operating properly. Any
operation problem you may have could be caused by your computer, cable, software, or selected
139
Содержание L220
