Indicator light (green)
26
THE IMAGE SYSTEM
IF THE CAPTURED IMAGE IS OUT OF FOCUS FRAME
Place the subject in the center of
the focus frame.
Press the shutter button halfway to
set focus.
When focus is set, the indicator light stops blinking
on both the LCD monitor and the VIEWFINDER.
Maintain the halfway shutter button
position and if you wish, reposition
the framing to your liking.
The automatic focus works only if the subject is in the FOCUS FRAME while
the SHUTTER button is first pressed halfway down. After the focus is locked
on the subject, you can adjust the frame to the desired composition and
release the SHUTTER.
Press the shutter button completely
to take the photo.
The shutter sound indicates the shutter has
released.
Turn the DIAL SWITCH to PHOTO MODE, and
then turn the POWER ON.
Just as when using the LCD monitor to compose
the shot, you must put the object to be focused on
in the center of the viewfinder.