background image

1

Setting Up the Scanner      

1-11

PapU-U
Rev. C

A5 size

CHAP1.FM

2/1/00

Pass 0

R

Proof Sign-off:
E.Omori

_______

<leadername>

_______

<editorname>

_______

Connecting the Scanner (SCSI) to Your Computer 

For instructions on connecting your SCSI model scanner to your 
computer, read this section.

For PC users:

Unless your PC already has a SCSI board installed, you need to 
install one, along with SCSI driver software. Install the SCSI board 
according to the directions included with it. Also see “Installing 
a SCSI Interface Board” on page 1-7.

If your PC has a SCSI board up and running, connect the scanner 
as described in the next section.

Note:

You will need to install the SCSI driver that is normally included with 
Windows 95, 98, or NT (see your system documentation for 
instructions), or the driver described in the SCSI board installation 
documentation. 

For Macintosh users:

Conventional Macintosh computers have built-in SCSI ports; 
therefore you do not need to install a SCSI board on a Macintosh. 
Follow the directions below to connect your scanner and 
computer.

Содержание G680A

























































































































Отзывы: