Epson FX-2170 - Impact Printer Скачать руководство пользователя страница 63

Страница: 63 / 157

Loading the push/pull tractor

To use the push and pull tractors in combination, you must first

purchase the optional pull tractor. See Chapter 4 for more

information on printer options.

Note:

The standard rear push tractor cannot be removed.

To load paper in the tractor, follow these steps:

1. Make sure the tractor is in the push/pull tractor position and the

paper release lever is set to either the front push or rear push
tractor position.

Load paper in the front or rear push tractor as described in the
previous sections.

Push the

LF/FF

button to advance the paper to the next page.

Fit the paper to the pull tractor’s sprocket as described in the

previous section.

Move the paper release lever to the pull tractor position, and use

micro adjust (described in the next chapter) to remove any

slack in the paper.

Move the paper release lever back to the push tractor position.

Attach the paper guide and printer cover.

2-22 Paper Handling

Содержание FX-2170 - Impact Printer






























































































































































Результаты поиска

Содержание FX-2170 - Impact Printer

Отзывы:

Похожие инструкции для FX-2170 - Impact Printer

Бренды по названию

Популярные бренды

Epson FX-2170 - Impact Printer, Руководство пользователя

Результаты поиска

Содержание FX-2170 - Impact Printer

Отзывы:

Похожие инструкции для FX-2170 - Impact Printer

Бренды по названию

Популярные бренды