Epson ES-1200C Pro PC Скачать руководство пользователя страница 48

Страница: 48 / 96

lnterface error

The interface setup is wrong, or the scanner is not properly

connected to the computer.

When this error occurs, check the interface connection Then
push the

RESET

button or turn the scanner off and then back on

to reset it.

Fatal error

This indicates one of the following problems:

One or more fluorescent lamps needs to be replaced.

The transportation screw is not released.

The scanner is broken.

There is a problem, such as an open cover, with the

optional transparency unit or the optional automatic

document feeder.

Check that the transportation screw is released and check any
options installed; then push the

RESET

button. If the scanner

still does not operate properly, try turning the scanner off and

then back on. If the scanner still does not operate properly, or if

this error occurs repeatedly, consult your dealer.

Option error

This indicates a problem such as a paper jam with an installed

option unit.

Check the option unit and correct the cause of the trouble.

Troubleshooting 3-3

Содержание ES-1200C Pro PC

































































































Результаты поиска

Содержание ES-1200C Pro PC

Отзывы:

Epson ES-1200C Pro PC, Руководство пользователя, Страница: 48 / 96

Результаты поиска

Содержание ES-1200C Pro PC

Отзывы: