Epson EPL-N4000, Руководство по обслуживанию

Страница: 173 / 306

EPSON EPL-N4000/EPL-N4000+ Chapter 4 Disassembly and Assembly
Rev.B 159
4.2.18 Tray 2 Feed Clutch
(See “Paper Pick Up-Tray 2” on page -262)
4.2.18.1 Removal
1. Remove the Rear Cover 1TM. (See “Rear Cover 1TM” on
page -143)
2. Disconnect J240 from the Feed Clutch.
3. Remove the E ring securing the Clutch to the shaft, and slide the
Clutch off of the shaft.
4. Remove the E ring securing the Gear to the shaft, and slide the
Gear and Bearing off of the shaft.
4.2.18.2 Installation
1. Slide the Bearing onto the shaft, and seat it in the cutout in the
printer frame.
2. Slide the Gear onto the shaft, and use an E ring to secure it to the
shaft.
3. Slide the Feed Clutch onto the shaft, making sure the positioning
notch on the shaft hooks onto the tab on the frame.
4. Use an E ring to secure the Clutch to the shaft.
5. Reconnect J240 to the Feed Clutch.
6. Reinstall the Rear Cover 1TM. (“Rear Cover 1TM” on page -143)
Figure 4-28. Removal of Tray2 Feed Clutch