Epson EPL-N3000, Справочное руководство

Страница: 370 / 443

Functions of the Control Panel
357
B
B
B
B
B
B
B
B
B
B
B
B
Page Protect
Allocates additional printer memory for printing data, as
opposed to receiving it. You may need to turn this setting on if
you are printing a very complex page. If a
Print Overrun
error
message appears on the LCD panel during printing, turn this
setting on and reprint your data. This reduces the amount of
memory reserved for receiving data so your computer may take
longer to send the print job, but it will allow you to print complex
jobs. Page Protect usually works best when
Auto
is selected. You
will need to increase your printer’s memory if memory errors
continue to occur.
Note:
Changing the Page Protect setting reconfigures the printer’s memory,
which causes any downloaded fonts to be deleted.
Toner Out
Specifies whether the printer stops printing when the printer is
running out of toner. If you select
Continue
, you can continue
printing after clearing the warning message. However, it may
cause problems such as faint print.
LCD Contrast
Adjusts the contrast of the LCD panel. Use the Up and
Down buttons to set the contrast between
0
(lowest contrast) and
15
(highest contrast.)
Quick Print Job Menu
This menu allows you to print or delete print jobs that were stored
in the printer’s Hard Disk Drive using the Quick Print Job feature
(Re-Print Job, Verify Job, Stored Job) of the printer driver’s
Reserve Job function. For instructions on using this menu, see
“Using the Quick Print Job Menu” on page 341.