Epson Ensemble HD 8100 - Home Cinema System, Руководство пользователя

Страница: 47 / 80

Making Detailed Adjustments
47
■
Component
Change this setting to match the type of equipment connected to the Component port.
For component video, select
Auto
to let the projector automatically interpret the signal;
or select
YCbCr
or
YPbPr
to manually select your video equipment’s signal.
■
Trigger Out
Turn on this setting to have the
Trigger out
port output a 12-volt signal to lower your
projection screen when the projector is running.
Note: If you change this setting, the new setting will take effect the next time you turn the
projector on.
■
Illumination
Turn off this setting to deactivate the lights on the projector’s
P
power and source
buttons. Use this setting if you find the lights distracting in a darkened room.
■
Sleep Mode
Turn off this setting if you don’t want the projector to enter sleep mode. (Sleep mode
shuts the projector off automatically when there is no video signal.)
Select
5min.
,
10min.
, or
30min.
as the length of time before shutoff; decreasing the time
conserves power and extends the life of the lamp.
To turn the projector back on, press the
P
power button on the remote control or the
projector.
■
Child Lock
Lets you lock the
P
power button on the projector’s control panel to make it more
difficult for a child to turn on the projector. See page 32 for more information.
■
Control Panel Lock
Lets you disable all the buttons on the projector’s control panel to prevent the image from
being accidentally changed once it is adjusted. See page 32 for more information.
Settings > Input Signal > Component
Settings > Trigger Out
Settings > Illumination
Settings > Sleep Mode
Settings > Child Lock
Settings > Control Panel Lock