Epson EMP-830, Руководство пользователя

Страница: 93 / 141

92
Monitoring and Controlling Projectors via a Network (for the EMP-830)
User’s Guide
Entering Numbers
Use the following procedure to enter numbers.
1.Move the cursor to the item to be entered, and then press the [Enter]
button on the remote control. The cursor will change to green and entry
mode will be enabled.
2.Press the [Num] button on the remote control. The [Num] button will
light and the buttons shown in the diagram below will switch to numeric
keypad mode so that you can enter numerals. If no buttons are pressed
for approximately 10 seconds while in numeric keypad mode, or if you
press the [Num] button once more, the [Num] button will switch off and
numeric keypad mode will be cancelled.
3.To enter two or more numbers, tilt the [ ] button of the remote control
to the right. The first number will be confirmed and the cursor will move
to the position for entering the second number.
4.Once all numbers have been entered, press the [Enter] button on the
remote control to accept the number. The cursor will change to yellow.
Once the settings have been made, press the [Menu]
button to close the configuration menu.
When this button is lit, the buttons
inside the box will change to numeric
keypad mode.
Remote control
Numeric keypad
3