Epson EMP-822H, Руководство пользователя

Страница: 31 / 78

List of Functions
31
Network Menu (EMP-83H/822H Only)
When "Network Protect" is set to "On" in "Password Protect", a message is displayed and the settings cannot be changed. You can make changes after
setting "Network Protect" to "Off".
s
p.19
Sub Menu Function
Wired LAN
You can make network settings.
DHCP : You can set whether to use DHCP (On) or not (Off).
If this is set to "On" you cannot set any more addresses.
IP Address : You can input the IP address assigned to the projector.
*1
You can enter a number from 0 to 255 in each field of the address. However, the following IP addresses cannot be used.
0.0.0.0, 0.x.x.x, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
Subnet Mask : You can input the Subnet Mask for the projector.
*1
You can enter a number from 0 to 255 in each field of the address. However, the following subnet masks cannot be used.
0 to 254.x.x.x. 255.255.255.255
Gateway Address : You can input the IP address for the gateway for the projector.
*1
You can enter a number from 0 to 255 in each field of the address. However, the following gateway addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
MAC Address : You can input the MAC Address for the projector.
PJLink Password Enter a password to use when you access the projector using compatible PJLink software.
*1
s
p.69
You can enter up to 32 alphanumeric characters.
Web Control
Password Enter a password to use when making settings and controlling the projector using Web control.
*1
You can enter up to 8 alphanumeric characters.
Web control is a computer function that allows you to set up and control the projector by using the Web browser on a computer on which EMP
Monitor is running.
s
EMP Monitor Operation Guide