background image

Epson EL 4S/33+

Keyboard

Mouse

Game port

Option slots

Speaker

Mass storage

Diskette drives

Hard disk

drives

Other devices

Keyboard

PS/2 compatible keyboard interface built

into main system board; 6-pin, mini DIN

connector; Num Lock setting selectable

through SETUP
PS/2 compatible mouse interface built

into main system board; 6-pin mini DIN

connector
10-pin game port interface on system

board; can control joy-stick functions with

the addition of an optional game port

connector
Three 16-bit, full-length and two 8-bit,

half-length I/O expansion slots, ISA

compatible, 8 MHz bus speed
Internal
Internal mounts:

Two 

 wide, one-inch high drives;

with three or more option cards installed,

the power supply may only support one

internal drive

Externally accessible mounts:
One 

 wide, third-height drive and

one 

 wide, half-height drive

3.5-inch diskette drive, 720KB or 1.44MB

storage capacity
5.25-inch 

diskette drive, 360KB 

or 1.2MB

storage capacity

 form factor hard disk drive(s), up

to half-height size
Half-height tape drive, CD-ROM drive,

optical drive, or other storage device;

 or 

 with mounting frames

Detachable, two-position height; 101 or

102 sculpted keys; countrydependent

main typewriter keyboard;

numeric/cursor control keypad; four-key

cursor control keypad; 12 function keys

Setup

Stored in ROM accessible by pressing

Program

Ctrl Alt S at the MS-DOS prompt

Physical Characteristics

Width

15.6 inches (396 mm)

Depth

14.5 inches (368 mm)

Height

4.1 

inches 

(104 

mm)

Weight

15 lb (6.8 kg), without drives or keyboard

Power Supply

Type

65 Watt, UL listed, fan-cooled

Input ranges

90 to 115,230 to 260 VAC

Maximum

+5 VDC at 7.5 Amps, -5 VDC at

outputs

0.1 Amps, +12 VDC at 2.0 Amps,

-12 VDC at 0.3 Amps

Frequency
Cables

50 to 60Hz
Two to main system board; four to mass

storage devices

Option Slot Power Limits

l

Based on a system containing one hard disk drive and one diskette drive.

Environmental Requirements

Epson EL 4S/33+ - 2

12/93

Содержание EL 4S/33











Отзывы: