6.
Close the ADF cover until it clicks.
Preventing Paper Jams
Check the following if paper jams occur frequently.
❏
Place the printer on a flat surface and operate in the recommended environmental conditions.
“Environmental Specifications” on page 231
❏
Use the paper supported by this printer.
“Available Paper and Capacities” on page 203
❏
Follow paper handling precautions.
“Paper Handling Precautions” on page 29
❏
Load paper in the correct direction, and slide the edge guide against the edge of the paper.
“Loading Paper in the Rear Paper Feeder” on page 31
❏
Do not load more than the maximum number of sheets specified for paper.
❏
Load one sheet of paper at a time if you have loaded several sheets of paper.
❏
Make sure the paper size and paper type settings match the actual paper size and paper type loaded in the
printer.
“List of Paper Type” on page 30
It is Time to Refill the Ink
Ink Bottle Handling Precautions
Read the following instructions before refilling ink.
Storing precautions for ink
❏
Keep the ink bottles out of direct sunlight.
❏
Do not store the ink bottles in high or freezing temperatures.
❏
Epson recommends using the ink bottle before the date printed on the package.
❏
When storing or transporting an ink bottle, do not tilt the bottle and do not subject it to impacts or temperature
changes. Otherwise, ink may leak even if the cap on the ink bottle is tightened securely. Be sure to keep the ink
bottle upright when tightening the cap, and take precautions to prevent ink from leaking when transporting the
bottle, for example, putting the bottle in a bag.
>
>
Ink Bottle Handling Precautions
186