Using Basic Projector Features
60
Caution
When shifting the lens, do not put your hands near the lens unit. Your fingers may
get caught between the lens unit and the projector, and cause an injury.
a
• Wait 20 minutes after turning on the projector before setting the lens
shift for maximum accuracy.
• When adjusting the image height, position the image lower than
where you want it to be and then move it up. This will help prevent
the image from moving down after adjustment.
• The image is clearest when the lens is at the home position. To move
the lens to the home position, hold the [Lens Shift] button on the
remote control or the [Lens] button on the control panel for more
than 3 seconds.
Zoom
You can resize the image.
Execution Method
• Press the [Zoom] button on the remote control.
• Press the [Lens] button on the control panel until the zoom adjustment
screen is displayed.
• Use the arrow buttons on the control panel or remote control to adjust the
image size.
H/V-Keystone
You can correct distortion in the horizontal and vertical directions
independently.
Execution Method
s
Settings
>
Geometry Correction
>
H/V-Keystone
Quick Corner
You can correct each of the four corners of the projected image
independently.
Execution Method
s
Settings
>
Geometry Correction
>
Quick Corner
Curved Surface
You can correct the corners and sides of an image projected on a curved
surface with the same radius.
