Epson EB-PU2220B Скачать руководство пользователя страница 192

Страница: 192 / 194

Notices

192

Check these sections for important notices about your projector.

Related Links

• "FCC Compliance Statement"

p.192

• "Indication of the manufacturer and the importer in accordance with

requirements of EU directive"

p.193

• "Indication of the manufacturer and the importer in accordance with

requirements of United Kingdom directive"

p.193

• "Restriction of Use"

p.193

• "Operating System References"

p.193

• "Trademarks"

p.193

• "Copyright Notice"

p.194

• "Copyright Attribution"

p.194

FCC Compliance Statement

Supplier's DECLARATION of CONFORMITY

According to 47CFR, Part 2 and 15
Class A digital devices, peripherals & switching power supplies

We: Epson America, Inc.
Located at: 3131 Katella Avenue, Los Alamitos, CA
Tel: 562-981-3840
Declare under sole responsibility that the product identified herein, complies

with 47CFR Part 2 and 15 of the FCC rules as a Class A digital device. Each

product marketed, is identical to the representative unit tested and found to

be compliant with the standards. Records maintained continue to reflect the

equipment being produced can be expected to be within the variation

accepted, due to quantity production and testing on a statistical basis as

required by 47CFR 2.906. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this

device must accept any interference received, including interference that may

cause undesired operation.
Trade Name: EPSON

Type of Product: LCD Projector
Model: HA63B/HA66B
Options:

Product name

Model

Remote controller

2211396 xx (x=0-9)

FCC Compliance Statement For United States Users

This device complies with part 15 of the FCC Rules. Operation is subject to

the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a

Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference when

the equipment is operated in commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in

residential area is likely to cause harmful interference in which case the user

will be required to correct the interference at this own expense.

WARNING

The connection of a non-shielded equipment interface cable to this

equipment will invalidate the FCC Certification or Declaration of this device

and may cause interference levels which exceed the limits established by the

FCC for this equipment. It is the responsibility of the user to obtain and use a

shielded equipment interface cable with this device. If this equipment has

more than one interface connector, do not leave cables connected to unused

interfaces. Changes or modifications not expressly approved by the

manufacturer could void the user's authority to operate the equipment.

Содержание EB-PU2220B



































































































































































































Результаты поиска

Содержание EB-PU2220B

Отзывы:

Бренды по названию

Популярные бренды

Epson EB-PU2220B, Руководство пользователя

Результаты поиска

Содержание EB-PU2220B

Отзывы:

Бренды по названию

Популярные бренды