Epson EB-L1100U, Руководство пользователя

Страница: 143 / 254

Submenu Function
IP Address Dis
play
To prevent the IP address from being displayed on the LAN
Standby screen, set this to
Off .
Notifications menu
When this is set, you receive an email notification if a problem or warning
occurs in the projector.
s
"Reading error notification mail" p.199
Submenu Function
Mail Notification
Set to On to send an email to the preset addresses when a problem
or warning occurs with a projector.
SMTP Server
You can input the IP Address
g
for the SMTP server for the
projector.
You can enter a number from 0 to 255 in each field of the address.
However, the following IP addresses cannot be used.
127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from
0 to 255)
Submenu Function
Port Number
You can input the port number for the SMTP server. The default
value is 25. You can input numbers between 1 to 65535.
From Enter the email address of the sender.
Address 1 Set
ting/Address 2
Setting/Address
3 Setting
Set the destination email addresses for the notification email, and
the notification content. You can register up to three
destinations. You can enter up to 32 single-byte alphanumeric
characters for the email addresses.( " ( ) , : ; < > [ \ ] and spaces
cannot be used.)
SNMP
Set to
On
to monitor the projector using SNMP
g
. To monitor
the projector, you need to install the SNMP manager program on
your computer. SNMP should be managed by a network
administrator. The default value is
Off
.
Trap IP Address
1/Trap IP Ad
dress 2
You can register up to two IP addresses for the SNMP trap
notification destination.
You can enter a number from 0 to 255 in each field of the address.
However, the following IP addresses cannot be used.
127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from
0 to 255)
Community
Name
Set the community name of SNMP. You can enter up to 32 single-
byte alphanumeric characters. (Spaces and symbols other than @
cannot be used.)
List of Functions
143