Epson EB-1930, Руководство пользователя

Страница: 115 / 146

Check Remedy
Is Output audio from the projector selected?
(Only when projecting USB Display)
Click All Programs - EPSON Projector - Epson USB Display - Epson USB Display Vx.xx Settings , and then select
Output audio from the projector .
The remote control does not work
Check Remedy
Is the remote control light-emitting area pointing towards the
remote receiver on the projector during operation? Point the remote control towards the remote receiver.
s
"Remote control operating range" p.18
Is the remote control too far from the projector? The operating range for the remote control is about 6 m.
s
"Remote control operating range" p.18
Is direct sunlight or strong light from fluorescent lamps shining onto
the remote receiver? Set the projector up in a location where strong light does not shine onto the remote receiver. Or set the remote receiver to
Off
from
Remote Receiver
in the Configuration menu.
s
Settings - Remote Receiver p.90
Is the correct setting for the Remote Receiver selected? Check the Remote Receiver from the Configuration menu.
s
Settings - Remote Receiver p.90
Are the batteries dead or have the batteries been inserted correctly? Make sure the batteries are inserted correctly or replace the batteries with new ones if necessary.
s
"Replacing the remote control batteries" p.17
When adjusting color difference using the multi-screen color
adjustment function, have you specified the correct projector ID for
the projector you want to operate? While holding the [ID] button, press the number button that matches the ID of the projector you want to operate.
s
"Setting an ID and using the remote control" p.65
I want to change the language for messages and menus
Check Remedy
Change the Language setting. Adjust the Language setting from the Configuration menu.
s
Extended - Language p.91
Problem Solving
115