Epson CX5000 - Stylus Color Inkjet, Быстрое руководство

Страница: 32 / 56

32
Maintaining Your CX5000 Series All-in-One
Maintaining Your CX5000
Series All-in-One
If you notice a decline in print quality, follow the instructions in this chapter for:
■
“Checking the Print Head Nozzles and Ink” (see below)
■
“Cleaning the Print Head” on page 33
■
“Checking the Ink Cartridge Status” on page 34
■
“Replacing Ink Cartridges” on page 34
Checking the Print Head Nozzles and Ink
If your printouts are faint or have gaps in them, some of the nozzles in the print
head may be clogged or ink may be running low in one or more of the ink
cartridges. Follow the steps below to check the print head nozzles and remaining
ink levels using the control panel.
1. Turn off the Epson Stylus CX5000 Series all-in-one.
2. Load letter-size paper in the sheet feeder.
3. Press the
B
ink and
P
On
buttons together and hold them down for about
3 seconds. The CX5000 Series turns on and prints a test pattern. It also shows
the percentage of ink left in each cartridge:
If the pattern does not look good, try cleaning the print head as described on the
next page.
Print head
nozzles are clean:
Print head needs
to be cleaned: