Epson CX5000 - Stylus Color Inkjet, Быстрое руководство

Страница: 34 / 56

34
Maintaining Your CX5000 Series All-in-One
Checking the Ink Cartridge Status
When the red B ink light starts flashing, one or more cartridges are low on ink.
When the red
B
ink light stays on, you need to replace the cartridge(s). You’ll also
see a message on your screen when you print, telling you which cartridge is low or
expended. (You cannot print when a cartridge is expended.)
Tip:
If a cartridge is more than six months old, print quality may decline. If necessary, try
cleaning the print head (see page 33). If printouts still do not look their best, you may
need to replace the cartridge.
You can purchase genuine Epson ink and paper from an Epson authorized reseller.
To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can
purchase online at
www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian
sales).
Use these part numbers when you order or purchase new ink cartridges:
Caution:
Leave the expended cartridge installed until you have obtained a replacement, or the ink
remaining in the print head nozzles may dry out.
Replacing Ink Cartridges
Make sure you have a new ink cartridge before you begin. Once you start replacing
a cartridge, you must complete all the steps in one session.
Caution:
Do not open ink cartridge packages until you are ready to install the ink. Cartridges are
vacuum packed to maintain reliability.
1. Make sure the Epson Stylus CX5000 Series all-in-one is on.
Color Part number T code number
Black 69 T069120
68 (High Capacity) T068120 (High Capacity)
Cyan 69 T069220
Magenta 69 T069320
Yellow 69 T069420