manualshive.com logo in svg

Epson CX3810 - Stylus Color Inkjet, Руководство по обслуживанию

Принтер Epson CX3810 - Stylus Color Inkjet с высокими техническими характеристиками. Здесь вы можете скачать бесплатное руководство пользователя с подробными спецификациями и инструкциями по использованию. Скачайте его с manualshive.com.

Поделиться
Скачать
background image

EPSON Stylus CX3700/CX3800/CX3805/CX3810/DX3800/DX3850

Revision A

MAINTENANCE

Overview

149

6.1  Overview

This section provides information to maintain the printer in its optimum condition.

6.1.1  Cleaning

This printer has no mechanical components which require regular cleaning except the 
Print Head. Therefore, when returning the printer to the user, check the following parts 
and perform appropriate cleaning if stain is noticeable.

†

Exterior parts
Use a clean soft cloth moistened with water, and wipe off any dirt. If the exterior 
parts are stained by the ink, use a cloth moistened with neutral detergent to wipe it 
off.

†

Inside the printer
Use a vacuum cleaner to remove any paper dust.

†

LD Roller
When paper loading function does not operate because friction of the LD Roller is 
lowered by any paper dust, set the adhesive side up of the cleaning sheet (included 
in the media) to remove any paper dust. Repeat loading the cleaning sheet several 
times.

†

Document glass
Remove dust or any paper with a clean dry cloth. In case dirt is serious or alien 
substance is stick, wipe it off with a cloth moistened with neutral detergent. In case 
Stain

6.1.2  Service Maintenance

If any abnormal print (dot missing, white line, etc.) has occurred or the printer indicates 
the “Maintenance request error” (This error is displayed as “Maintenance call error” in 
the STM3), take the following actions to clear the error.

†

Print Head cleaning
When dot missing or banding phenomenon has occurred, you need to perform the 
Print Head cleaning operation*

1

 by using the Print Head cleaning function. This 

function can be performed by the control panel operation, the printer driver utility 
and the Adjustment program. 
In case that the cleaning sequence is performed by the control panel operation, 
confirm that the printer is in stand-by state (the Power LED is lighting), and hold 
down the Ink SW on the control panel for more than 3 seconds. Then, the printer 
starts the cleaning sequence (the Power LED blinks during this sequence). 
In case that you select and perform the manual cleaning by the printer driver 
utility, the most appropriate cleaning mode is selected. The following is the 
process to perform the Print Head cleaning from the printer driver utility. 
As for the operation of the Adjustment program, refer to Chapter 5 Adjustment.

Note *1:

The Stylus CX3700/CX3800/CX3805/CX3810/DX3850/DX3850 has three modes 
for manual cleaning, and even during printing, the appropriate cleaning mode is 
automatically selected and performed according to various conditions. Therefore the 
ink consumption amount for manual cleaning varies depending on each mode (Refer 
to Chapter 2).

C A U T I O N

„

Never use chemical solvents, such as thinner, benzine, and 
acetone to clean the exterior parts of the printer like the 
Housing. These chemicals may deform or deteriorate the 
components of the printer.

„

Be careful not to damage any components when you clean 
inside the printer.

„

Do not scratch the coated surface of the PF Roller Unit. Use 
soft brush to wipe off any dusts. Use a soft cloth moistened 
with alcohol to remove the ink stain.

„

Do not use cleaning sheet included in the media for normal 
usage. It may damage the coated surface of PF Roller Unit.
If the adhesive surface of the cleaning sheet is set to the LD 
Roller shaft side and used to clean the LD Roller surface, it is 
no problem.

„

When using compressed air products; such as air duster, for 
cleaning during repair and maintenance, the use of such 
products containing flammable gas is prohibited.

Содержание CX3810 - Stylus Color Inkjet












































































































































































Отзывы:

Нет отзывов

Похожие инструкции для CX3810 - Stylus Color Inkjet

TallyGenicom 9022 Brochure & Specs preview
9022
Бренд: TallyGenicom Страницы: 3
Oki ML280 Elite Parts List preview
ML280 Elite
Бренд: Oki Страницы: 6
Oki ML1120 Safety & Warranty preview
ML1120
Бренд: Oki Страницы: 32
Oki ML1120 User Manual preview
ML1120
Бренд: Oki Страницы: 52
Oki ML520n Guía Del Usuario preview
ML520n
Бренд: Oki Страницы: 64
Oki ML520 Service Manual preview
ML520
Бренд: Oki Страницы: 269
Oki C9200 Replacement Manual preview
C9200
Бренд: Oki Страницы: 2
Oki C9200 Setup Manual preview
C9200
Бренд: Oki Страницы: 32
Oki C9200 Parts List preview
C9200
Бренд: Oki Страницы: 33
Oki B721dn Instructions Manual preview
B721dn
Бренд: Oki Страницы: 8
Oki ML690 Manual De L'Utilisateur preview
ML690
Бренд: Oki Страницы: 101
Oki ML690 Guía Del Usuario preview
ML690
Бренд: Oki Страницы: 104
Oki ML690 User Manual preview
ML690
Бренд: Oki Страницы: 99
Oki ML620 Manual Do Usuário preview
ML620
Бренд: Oki Страницы: 112
Oki ML620 User Manual preview
ML620
Бренд: Oki Страницы: 100
Oki Okicolor8 Specifications preview
Okicolor8
Бренд: Oki Страницы: 38
Oki ML490 Series Guía Del Usuario preview
ML490 Series
Бренд: Oki Страницы: 94
Oki ML320 Turbo Guide Utilisateur preview
ML320 Turbo
Бренд: Oki Страницы: 122

Бренды по названию

Популярные бренды

Загрузить еще бренды