NetWare printers cannot be monitored.
Cause
What to do
You are using EPSON Net!.
You cannot use EPSON Status
Monitor 2 and EPSON Net! at the
same time. Quit EPSON Net! and
use EPSON Status Monitor 2. If
you use EPSON Net!, quit EPSON
Status Monitor 2 in advance.
NetWare print servers cannot be monitored beyond routers.
Cause
What to do
The number of hops is set to 0.
Change the number of hops
according to “Changing the Initial
Settings” on page 1-11. See also
“Tips for Network
Administrators” on page 3-2.
An existing printer cannot be found in Windows NT 3.51.
Cause
What to do
You may have logged on
to the
Log on again. To clear this
network before network modules
problem immediately after the
were completely loaded.
operating system starts, log on
after access to the hard disk drive
is completed.
Tips and Troubleshooting
3-5
