6
2.
Input the IP address of the TM-P60 in the browser address bar and press
Enter
(Example: http://
192.168.192.168 [default]).
3.
The browser displays a dialog box requesting a user name and password. Click
OK
without entering any
user name or password. (If you have changed the user name and password, you need to input them.)
4.
You can modify the parameters by following the menus. You must click
Submit
to send the change to the
printer and then click
Reset
to make the submission effective on each Web page. If you change the IP
address, SSID, etc., you have to change the setting of the host PC and AP to match the printer’s setting.
❏
Using the TMNetWinConfig (version 2.0) and the
TM-P60 Technical Reference Guide
For details, go to the following web site: http://pos.epson.com/
Specifications
Note: For the battery specifications, see its instructions.
Print method
Thermal line printing
Print density
203 dpi × 203 dpi [dpi: dots per 25.4 mm (dots per inch)]
Printing width (default)
52.5 mm, 420 dot positions
Print font
Font
Font A: 12 × 24, Font B (default): 10 × 24, Font C: 8 × 16
Characters per line
Font A: 35, Font B: 42, Font C: 52
Character size
(W
×
H)
Font A: 1.50 × 3.0, Font B: 1.25 × 3.0, Font C: 1.0 × 2.0
Character set
95 Alphanumeric, 48 International, 128 × 10 Graphic
Paper
Roll paper
dimensions (default)
57.5
±
0.5 mm
(59.5
±
0.5 mm by removing the spacer installed)
Paper thickness
50 µm ~ 80 µm
Paper roll spool
diameter
18 mm outside
Specified thermal
paper
Original: Kanzaki Specialty Paper (USA): P350 (paper thickness: 62 µm),
P310 (paper thickness: 58 µm), P300 (paper thickness: 56 µm)
Print speed
Maximum 70 mm/s, when number of dots per dot line is 64 dots or less
(printing with a fully charged battery, at 25°C, print density 100%)
Interface
RS-232C, IEEE802.11b
Receive buffer
128 bytes
Power
consumption
Specified battery
Lithium-ion battery: Product name: LIP-2500, Trade name: Seiko Epson
Corporation
Output: DC 7.4 V
Capacity: 2200 mAh
AC adapter (option)
Output voltage: DC 12 V
Input voltage: AC 100 V ~ 240 V
Product name: PS-10, Trade name: Seiko Epson Corporation
Life
Mechanism
10,000,000 lines printing
Print head
100,000,000 dots
Autocutter
500,000 cuts
Temperature/
humidity
Operation
(Printing quality
guaranteed)
5 ~ 45°C, 10 ~ 90% RH
Storage
Abnormal operations not found when the printer is left under the
environment of 25°C, 60%RH for 2 hours after it was left in the following
conditions:
High temperature and humidity: 50°C, 90% RH for 120 hours
High temperature: 70°C for 120 hours
Low temperature: -25°C for 120 hours
Overall dimensions (mm)
103 × 159 × 65 (W × D × H)
Mass (with the battery, without roll
paper)
Approx. 670 g
TM-P60_eng_um_02.fm Page 6 Tuesday, March 30, 2004 5:13 PM
