AcuLaser C2800 Series
User's Guide
Troubleshooting
250
Printing in the PostScript 3 Mode Problems
The problems listed in this section are those that you may encounter when printing with the
PostScript driver. All procedural instructions refer to the PostScript printer driver.
The printer does not print correctly in the PostScript mode
The printer does not print
Cause
What to do
The printer’s emulation mode setting is incorrect.
The printer is set to the Auto mode by default, so that it can
automatically determine the encoding used in the received
print job data and select the appropriate emulation mode.
However, there are situations where the printer cannot select
the correct emulation mode. In this case, it must be set
manually to
PS3
.
Set the emulation mode through the SelecType Emulation
menu on the printer. See “Emulation Menu” on page 151.
The printer’s emulation mode setting for the interface
that you are using is incorrect.
The emulation mode can be set individually for each interface
which receives print job data. Set the emulation mode for the
interface you are using to
PS3
.
Set the emulation mode through the SelecType Emulation
menu on the printer. See “Emulation Menu” on page 151.
Cause
What to do
The
Print to file
check box is selected in the Print
dialog box (except on Mac OS X).
Clear the
Print to file
check box in the Print dialog box.
The
Save as File
check box is selected on the Output
Option sheet in the Print dialog box (Mac OS X only).
Clear the
Save as File
check box on the Output Option sheet
in the Print dialog box.
An incorrect printer driver is selected.
Make sure that the PostScript printer driver that you are using
to print is selected.
The Emulation menu in the printer’s Control Panel is
set to a mode other than
Auto
or
PS3
for the interface
that you are using.
Change the mode setting to either
Auto
or
PS3
.
Downloaded from ManualsPrinter.com Manuals
