Setting Up the Projector
23
If you press the
Source
button on the projector,
you see a menu of available sources.
Press the
u
or
d
button to highlight a source and press the
Select
button.
If the Component source is selected, press the
Compo.
button on the remote control to
display the following menu:
Press the
u
or
d
button to highlight
YCbCr
or
YPbPr
, or select
Auto
so the projector can
automatically detect the Component source type. Then press the
Select
button.
Note:
If an image does not appear, check the troubleshooting tips on page 56.
To temporarily turn off the image and darken the screen, press the
Blank
button. Press the
Blank
button again to return to normal viewing.
Source button
PowerLite Cinema Pro 810.book Page 23 Thursday, December 6, 2007 11:25 AM