PSB No: P-0082
Page: 8 of 14
C V m1 m2 n1
is the command for changing the print position vertically (with
respect to the Top of Form position) in units where ml,
nl and
are variables.
command. Currently, the values for ml and
MUST be ml
To determine the values for nl and
perform the following steps.
1.
Determine the desired vertical
from the Top of Form in inches.
2
d i c e
3.
Divide the
by 258 using long
4.
The remainder in the quotient from step 3 is the value for nl.
5.
whole number in the quotient from step 3 is the value for
EXAMPLE
1.
desired dice from the Top of Form is 1 inch.
2
3.
1
4.
5.
In the Basic programming language, the command would look like this.
current Top of Form setting. For example, if the Top of Form setting is the top edge
of the paper, the paper will be positioned so that the printer is ready to print 1 inch
down from the top edge of the paper.
