Epson AL-M300 Series, Руководство пользователя

Страница: 86 / 225

Auto LF
If you select
Off
, the printer does not send an automatic line-feed (LF) command with each
carriage-return (CR). If
On
is selected, a line-feed command is sent with each carriage-return. Select
On
if your text lines overlap.
Alt. Graphics
Turns the Alternate Graphics option on or off.
Bit Image
The printer is able to emulate the graphics densities set with the printer commands. If you select
Dark
,
the bit image density is high, and if you select
Light
, the bit image density is low.
If you select
BarCode
, the printer converts bit images to bar codes by automatically filling in any
vertical gaps between dots. This produces unbroken vertical lines that can be read by a bar code reader.
This mode will reduce the size of the image being printed, and may also cause some distortion when
printing bit image graphics.
ZeroChar
Selects whether the printer prints a slashed or unslashed zero.
CharacterSet
Selects character table 1 or 2.
Password Config Menu
Item Settings (default in bold)
Password Config
* -
Limitation
Disable , Interface, Config, All
*
The default password is blank. You can enter up to 20 characters for the password.
Password Config
Changes the password. Enter the old password first and then enter the new password twice.
AL-M300/AL-M400 Series User's Guide
Using the Control Panel 86