46
6
The “Local port support” screen appears. Select the port driver to be
installed and then click the [Next] button. For Serial or Ethernet interface,
do not select any printer driver and click [Next] button.
7
The “Printer Configuration” screen appears. When installing the printer
driver as well as the APD, click the [Add] button.
8
The “Add Printer” screen appears. Configure the printer driver and port
to use, and click the [Next] button.
Item
Description
Automatically install detected USB devices.
When this is checked, the Plug and Play function will
be enabled for the TM printer equipped with the USB
interface. If this is not checked, the printer driver
cannot be installed by the Plug and Play function.
Launch StatusViewer on login.
(TM-C100 is needed)
When this is checked, the Status Viewer
automatically starts to run when you login the
computer.
Setting
Description
Select driver
Select the printer driver to be installed.
Printer name
The printer driver name. This is changeable.
Do not use Unicode/2-byte characters for the name.
Port Type
Select the type of interface to connect the computer and printer.
Create a Parallel port:
Proceed to Step 9.
Create a Serial port:
Proceed to Step 10.
Create an Ethernet port:
Proceed to Step 11.
Create a USB port:
Proceed to Step 12.
Set as Default Printer
Check when configuring the printer as that normally used from the
Windows applications.
Содержание Advanced Printer Driver Ver.4
Страница 18: ...18 ...
