About the PostScript Printer Driver
147
1. Open the
Applications
folder, open the
Utilities
folder, then double-click
Printer Setup Utility
(for Mac OS X 10.3 and 10.4) or
Print Center
(for Mac OS X 10.2).
The Printer List window appears.
2. Click
Add
in the Printer List window.
3. Select the protocol or the interface that you are using from the pop-up list.
Note for AppleTalk users:
Make sure to select
AppleTalk
. Do not select
EPSON AppleTalk
, because it cannot be used with the
PostScript 3 printer driver.
Note for IP Printing users:
❏
Make sure to select
IP Printing
. Do not select
EPSON TCP/IP
, because it cannot be used with the
PostScript 3 printer driver.
❏
After selecting
IP Printing
, enter the IP address for the printer, then make sure to select the
Use
default queue on server
check box.
Note for USB users:
Make sure to select
USB
. Do not select
EPSON USB
, because it cannot be used with the PostScript 3
printer driver.
4. Follow the instructions as appropriate below to select your printer.
AppleTalk
Select your printer from the Name List, then select
Auto Select
from the Printer Model List.
IP Printing
Select
Epson
from the Name List, then select your printer from the Printer Model List.
USB
Select your printer from the Name List, then select your printer from the Printer Model List.
Note for Mac OS X 10.3 and 10.4 users:
If ESC/Page driver is not installed, your printer model is automatically selected in the Printer Model List
when you select your printer from the Name List while the printer is on.
Bonjour (Rendezvous)
Select your printer, the printer name is followed by
(PostScript)
, from the Name List. Your
printer model is automatically selected in the Printer Model List.
Note for USB (for Mac OS X 10.2) or Bonjour (Rendezvous) users:
If your printer model is not automatically selected in the Printer Model list, you need to reinstall the
PostScript printer driver. See “Installing the PostScript printer driver” on page 145.
5. Click
Add
.