Epson AcuLaser CX37DNF Guide, Руководство пользователя

Страница: 76 / 86

Error message Cause Solution
Check Fax Mode
A fax error occurred while an
operation was being performed
in Copy mode or Scan mode.
Press the Fax key to check the error condition,
and take appropriate measures.
HANG UP THE PHONE
The receiver of the connected
telephone is lifted. Replace the receiver of the connected
telephone on the hook.
LINE PROBLEM
CHECK LINE
❏
The telephone dialing
system or telephone wiring
system is not set correctly.
❏
The telephone cable is not
attached correctly.
❏
Check the telephone dialing system or
telephone wiring system and use the
appropriate configuration menu to make
the correct settings.
❏
Correctly connect the telephone cable.
MEMORY FILE FULL The number of items registered in
the memory has exceeded the
maximum allowed. If MEMORY RX MODE is set to ON , cancel memory
reception mode, and print received
documents stored in the memory.
MEMORY FULL
❏
While sending a fax, the size
of the data for the scanned
image has exceeded the
capacity of the memory.
❏
While receiving a fax, the size
of the data for the scanned
image has exceeded the
capacity of the memory.
❏
If MEMORY RX MODE is set to ON , cancel
memory reception mode, and print
received documents stored in the
memory.
❏
Send the fax manually.
REDIAL ALL FAILED All redial attempts failed because
either the recipient’s line is busy
or there was no answer. Check the condition of the recipient’s line, and
then try sending the fax again.
Epson AcuLaser CX37DNF Facsimile User’s Guide
Troubleshooting 76