Epson 875DC - Stylus Photo Color Inkjet Printer, Руководство по обслуживанию

Страница: 33 / 66

EPSON Stylus PHOTO 875DC Revision A
DISASSEMBLY AND ASSEMBLY Disassembly Procedures 33
4.2.1 HOUSING Removal
Since the printer mechanism itself structures the bottom part, it appears
just by removing HOUSING.
1. Set the PG adjust lever to “+”.
2. Using the tweezers, release the hook securing HOUSING, SUPPORT,
PG COVER to HOUSING and remove HOUSING, SUPPORT, PG
COVER from HOUSING.
Figure 4-2. HOUSING, SUPPORT, PG COVER Removal
3. Remove the four screws (CBS, 3x10) securing HOUSING. Then,
pushing the PG lever inward, remove HOUSING by moving it upward.
Figure 4-3. HOUSING Removal
C H E C K
P O I N T
!
To remove HOUSING, push it to the rear up and then lift it
up.
!
When installing HOSING, make sure the PG adjust lever is
set to “+”.
!
When installing HOUSING, ensure the head FFCs are not
caught in HOUSING at the back of the printer.
dis03
HOUSING, SUPPORT,
PG COVER
dis04
HOUSING
CBS (3x10) Screws
CBS (3x10) Screws