Epson 821p - PowerLite XGA LCD Projector, Руководство пользователя

Страница: 82 / 114

82
Solving Problems
■
The attached computer may be in sleep mode or displaying a
black screen saver. Try pressing a key on the computer.
■
If you’re projecting from a video source, press the
Play
button on
your video equipment.
Nothing appears on the external monitor.
■
Make sure the VGA computer cable is connected to your
computer’s video port and the projector’s
Computer1/Component Video1
port. It will not work if you
connected the computer cable to the projector’s
Computer2/Component Video2
port.
■
Make sure the cable from your monitor is connected to the
projector’s
Monitor Out
port.
You see a blue screen with the message
No Signal
displayed.
■
Make sure the cables are connected correctly, as described in
Chapter 1.
■
Make sure the power to your computer or video source is
turned on.
■
If you’ve connected a computer and one or more video sources,
you may need to press the
Source Search
button on the
projector, or the
Comp 1
,
Comp 2
,
S-video
, or
Video
button
on the remote control to select the correct source. Allow a few
seconds for the projector to sync up after pressing the button.
■
If you’ve connected a notebook computer, make sure it’s set to
display on an external monitor. See page 33.