Epson 7900p - PowerLite XGA LCD Projector, Руководство пользователя

Страница: 63 / 146

Using the Remote Control
63
Controlling Multiple Projectors
If you’re using more than one projector, you can control all the
projectors—or just selected ones—by using the projector ID system.
To operate a projector, you have to set the remote control’s ID to
match that of the projector. Or you can control all of the projectors
simultaneously by setting the remote control’s ID to zero.
Setting the Projector ID
The projector’s default ID is 1. If you need to change it, follow these
steps:
1. Press the
Menu
button on the remote control.
You see the projector’s menu screen.
2. Select the
Advanced2
menu and press
Enter
. Then highlight
Projector ID
and press
Enter
.
3. Press the right or left side of the pointer button to increase or
decrease the ID value.
4. Press
Enter
to set the value.
5. When done, press
E
SC
to exit the menu system.
Brightness Control Brightness Control High High Low Low
:
Video Video
Audio Audio
Setting Setting
User's Logo User's Logo
Advanced1 Advanced1
About About
Reset All Reset All
Projector ID Projector ID
Network Network
Reset Reset
Execute Execute
: 1 : 1
[Menu]: Exit [Menu]: Exit
Effect Effect
Advanced2 Advanced2
COM Port COM Port
BNC Sync Termination BNC Sync Termination
:
ON ON OFF OFF
:
Set Set
Set Set
RS-232C RS-232C USB USB
[ / ]: Select [ / ]: Select [ ESC ]: Return [ ESC ]: Return [ ]: Set [ ]: Set
Auto setup Auto setup :
OFF OFF
:
ON ON