Epson 3800 - Stylus Pro Color Inkjet Printer, Руководство по обслуживанию

Страница: 67 / 286

EPSON Stylus Pro 3800/3800C/3850 Revision A
TROUBLE SHOOTING Remedies for Warning Messages 67
MAINTENANCE REQUEST XXXX
When a Maintenance Request error occurs, the printer displays on the LCD a hexadecimal code of “NNNN” which correspond to the bit numbers assigned to error statuses as shown
in the table below.
NOTE :
Ex): When “Maintenance Request 0088” is displayed.
As “0088” in hexadecimal means “1000 1000” in binary, you can find out the code is assigned to Bit-3 and Bit-7 referring to the above table. In this case, two
errors are occurring simultaneously. (Bit-3: battery exhaustion/ Bit-7: the date and time has not been set.)
Table 3-3. Maintenance Request Errors
Bit assignment (Binary)
XXXX
(Hexa-
decimal)
Cause Remedy
0 1 2 3 4 5 6 7 8 9 10 11 12 13-15
1 0 (NA) 0 (NA) (NA) 0 0 0 (NA) (NA) 0 0 (RSVD) 0001
The counter of waste ink used for
printing margins at borderless printing
has reached the specified value.
Replace the waste ink pads for borderless printing
(POROUS PAD,INK WASTE BOX, LEFT/RIGHT) with
new ones, and clear the counter using the Adjustment
Program.
0 1 (NA) 0 (NA) (NA) 0 0 0 (NA) (NA) 0 0 (RSVD) 0002
The CR scan pass counter has reached
the specified value. (ink supply tube
has reached its end of life.)
Replace the tube (INK,SYSTEM,ASSY.) with a new one,
and clear the counter using the Adjustment Program.
0 0 (NA) 1 (NA) (NA) 0 0 0 (NA) (NA) 0 0 (RSVD) 0008
The RTC backup battery becomes
exhausted. Replace the battery with a new one, and execute RTC
initialization using the Adjustment Program.
0 0 (NA) 0 (NA) (NA) 1 0 0 (NA) (NA) 0 0 (RSVD) 0040
The pump counter has reached the
specified value. Replace the pump cap unit (PUMP,CAP,ASSY.) with a new
one, and clear the counter using the Adjustment Program.
0 0 (NA) 0 (NA) (NA) 0 1 0 (NA) (NA) 0 0 (RSVD) 0080
The date has not been set. Execute RTC initialization using the Adjustment Program.
0 0 (NA) 0 (NA) (NA) 0 0 1 (NA) (NA) 0 0 (RSVD) 0100
The RTC backup battery power has
temporarily dropped.
Wait until the power recovers.
0 0 (NA) 0 (NA) (NA) 0 0 0 (NA) (NA) 1 0 (RSVD) 0800
The ink cartridge installation/removal
counter has reached the upper limit.
Replace the waste ink pad (POROUS PAD,TRAY,INK
EJECT) in the cartridge holder with a new one, and clear the
counter using the Adjustment Program.
0 0 (NA) 0 (NA) (NA) 0 0 0 (NA) (NA) 0 1 (RSVD) 1000
The number of drives of the ink
selector has reached the upper limit. Replace the ink selector (INK,SYSTEM,ASSY.) with a new
one, and clear the counter using the Adjustment Program.
Ex.
0 0 (NA) 1 (NA) (NA) 0 1 0 (NA) (NA) 0 0 (RSVD) 0088 RTC backup battery has not been set.
Install a battery, and execute RTC initialization using the
Adjustment Program to set date and time.
Description
Borderless printing absorber
CR l
ife
U
n
assign
ed
Battery exhaustion
U
n
assign
ed
U
n
assign
ed
Pump cap unit
li
fe
Date not set
Battery voltage
U
n
assign
ed
U
n
assign
ed
Holde
r absorber l
ife
In
k selecto
r
li
fe
U
n
assign
ed