Epson 1640SU - Perfection Photo Scanner Скачать руководство пользователя страница 61

Страница: 61 / 192

Understanding EPSON TWAIN Features

3-7

Auto Document Feeder:

Choose this setting to use the optional Automatic Document
Feeder.

Multi-page support with the Automatic Document Feeder

If you select

Auto Document Feeder

as the Document Source

and click the

Scan

button, the following dialog box appears.

If you select

Single Page

, only one page is fed from the Automatic

Document Feeder and scanned.

If you select

All Pages

(default), all the pages are fed from the

Automatic Document Feeder and scanned. The All Pages option
may not work with some applications.

TPU for Neg. Film, TPU for Pos. Film:

Select one of these settings when using the Film Adapter. If you
are scanning negative film, select

TPU for Neg. Film

, and if you

are scanning positive film (or slides), select the

TPU for Pos. Film

tting.

Содержание 1640SU - Perfection Photo Scanner

































































































































































































Результаты поиска

Содержание 1640SU - Perfection Photo Scanner

Отзывы:

Epson 1640SU - Perfection Photo Scanner, Справочное руководство, Страница: 61 / 192

Результаты поиска

Содержание 1640SU - Perfection Photo Scanner

Отзывы: