EPSOM – E7106C 9
For assembly advice or parts go to
STEP 4
Turn the Top (with the Division attached) onto it’s back edge. Slide it onto the top of the Ends as shown
below. Fit the Connecting Bolts down into the Cams in the Ends.
Turn all four Cams in the Ends in a clockwise direction to lock the Top to the Ends. They must tighten at
least ¼ of a turn,
Use the
H5 Large Screw
to attach the Division to the Back Rail.
Tap the 4 x Nail on Furniture Glides into the end of the Ends. Space them about 20mm in from the edge.
H5
STEP 5
Turn the chest onto its front edge. Make sure the surface is clear.
Your Back Panel is made up of three pieces. Fit an outside panel into place against one side of the unit.
Partly tap a couple of nails into the corners to hold it in place. Fit the centre panel with the grooves to
the outside panel. Tap in a couple of nails to hold in place. Fit the second outside panel to the centre
panel.
Make sure the panels are fitted tightly and the Ends of the chest are straight before nailing
completely into place.
Space the nails about 100mm apart.
Nail on Furniture Glides