EPSOM – E7106C 4
For assembly advice or parts go to
DRAWER SLIDES
Your pack will contain six sets of Metal Drawer Slides. These are bundled together with adhesive tape.
Each set comprises of 4 components. Undo the tape on one set at a time and separate the parts into four
piles.
LEFT HAND PART (
DL
) RIGHT HAND PART (
DR
)
T
he Drawer Slide components shown above are attached to the
drawers
. They have the letters
DR
or
DL
stamped on them to indicate left hand or right hand components. Put these parts aside for attaching to
the drawers later on.
LEFT HAND PART (
CL
) RIGHT HAND PART (
CR
)
The Drawer Slide components shown above are to be attached to the
cabinet
. They have letters
CR
or
CL
stamped on them to indicate left hand or right hand components.
INSTALL THE HARDWARE
STEP 1
Lay the LH End with holes facing upwards on a smooth clean surface. Take five LH cabinet drawer
slides (CL) and screw them to the LH End using the
H4 Drawer Slide Screws
. Use the holes as
indicated in the diagram above.
H4
Insert two
H2 Cams
as shown in
diagram. Make sure the arrow on
the top of the Cam points towards
the top edge of the End.
H2
Push two
H15 Dowels
into the top
edge of the End.
H15
Screw four
H1 Connecting Bolts
into the holes indicated on the
opposite diagram.
H1
Use these holes