Job No ………………….
E7105T – 5 DRAWER TALLBOY
Congratulations on your purchase of your
EPSOM 5 DRAWER TALLBOY
. The
EPSOM
Collection is
made in New Zealand from 100% New Zealand made MDF –an environmentally sound renewable
resource.
If you require any parts or assembly advice or have any questions please go to
0800 100 858.
WHERE TO ASSEMBLE YOUR TALLBOY
Assemble your unit on a clean and smooth surface, free of anything which may damage the laminate
surface. A carpeted floor is ideal. If assembling on a workbench or table we suggest you cover it with
the carton the unit was packaged in.
Warning
! Never leave hardware parts where children can reach them. Small parts may be a choking
hazard!
PARTS LIST
Please check you have all the parts before beginning to assembling your cabinet. The measurements
will help you identify each part. If any parts are missing or damaged please contact us directly for
replacements and advice. Do not call the store you bought the cabinet from as they will be unable to
help you.
Note: You will find two pieces of board fitted across the ends of the package. These are
for packing purposes only and are not part of the cabinet.
QTY PART
MEASUREMENTS
NOTES
1
Top
796 x 396 x 25mm
25mm thick. Blue mark on back edge.
1
LH End
1017 x 372 x 15mm Finished on both sides. Green mark on back
edge.
1
RH End
1017 x 372 x 15mm Finished on both sides. Red mark on back edge.
1
Top Drw Front
744 x 141 x 15mm
Black finish on one side
4
Bottom Drw Fronts
744 x 195 x 15mm
Black finish on one side
1
Bottom Rail
750 x 80 x 15mm
Plain
1
Rear Toeboard
750 x 80 x 15mm
Plain
1
Front Toeboard
750 x 80 x 15mm
Black finish on one side
1
LH Drw Side – narrow 340 x 115 x 12mm
Plain
4
LH Drw Side - deep
340 x 160 x 12mm
Plain
EPSOM
collection
