Epsolar ViewStar MT-100, Инструкция по эксплуатации, Страница: 33 / 56

29
When save confirmation chosen, the indication of successful saving will occur as follows.
After parameters successfully saved, it returns to main menu interface.
sunrise time, the
controller will turn off the load output at the sunrise time, which
shows light control first!
Time control interface
Press or to choose time control mode. When the inverse cursor
rests on
Time
in the time control interface, press to enter into time control
interface. When press or , the inverse cursor moves among
every parameters. When is continuously pressed, it moves back to main
menu interface and press or to modify all parameters of time
interval 1.
When is continuously pressed, it will enter into the following interface.
When press or , the inverse cursor moves among every
parameters. Press or to modify all parameters of time interval 2.
Light Timer Control
On : 0 6 .0 V Delay 10 m
Off : 05.0 V Delay 10 m
Work Time : 10 : 00 : 00
SAVE SUCCESS
Time Control 1
On Time : 07 : 20 : 00
Off Time : 15 : 00 : 00
+
-
+
-
+
-