Epsolar ViewStar MT-100, Инструкция по эксплуатации, Страница: 24 / 56

20
Device Setting Interface
In the main menu interface, press or , the inverse cursor
moves between interfaces of main menu 1 and main menu 2. When the inverse cursor
rests on
2 Device Set
in the main menu interface 1, press to enter into
system setting interface which displays the following contents. When setting in this
interface, real time clock will stop running. Please correct real time clock again after
parameters are changed.
In the interface, press or , the inverse cursor moves among
every parameter. When is continuously pressed, the inverse cursor moves
back to main menu interface. When inverse cursor rests at some parameter, the contents
of the parameter can be modified. When modify date and time information, press
to increase the figure and press to reduce figure. When modify LCD
backlight working mode, push or , the automatic switch
on-and-off time of LCD backlight can be set between 00~30 minutes. Only when the
inverse cursor moves to option of LCD backlight, can the modified parameters
information can be saved. Press , then the following picture appears. Press
button or to choose save confirmation or save cancelation.
After choosing confirmation, press again, the modified parameters will be
saved or cancelled. If choose save cancellation, the inverse cursor returns to main menu
interface. Automatic default off time of LCD backlight is one (1) minute.
+ -
Device Set
Date : 12 05 - 2011
Time : 12 : 24 : 23
Backlight : 10 Mins
+
-
/ + -
+ -