Epsolar Tracer-3215RN, Инструкция по эксплуатации, Страница: 12 / 36

8
The Tracer can accept 12V, 24V nominal off-grid solar module arrays Grid –tie
solar module(s) may be used if the open circuit voltage does not exceed the maximum
solar input rating The solar module(s) nominal voltage must be equal to or greater
than the nominal battery voltage
Figure3-3 Solar Module wiring
Step 4: Accessories (option)
Install Remote Meter (purchased separately) if required Refer to the instructions
provided for detailed installation procedures
Step 5: Confirm Wiring
Double-check the wiring in step1 through 4 Confirm correct polarity at each
connection Verify that all six power terminals are tightened
Step 6: Confirm Power-up
When battery power is applied and the Tracer powers up, the battery led indicator
will be green
If the Tracer does not power up or battery status LEDs error exists, refer to
Section 5 Troubleshooting
Solar Module