Epsolar EPIP20-LT Series, Инструкция по эксплуатации

Страница: 4 / 5

7 8
4.5.1 Real time adjustment

When LCD displays time to be adjusted:: Press K3 for two times
and display
“SET”

Press K1 or K2 to change the year, month and day automatic and
circlely

Press K3,
“SET” flashing, and modify the data by K1 and K2, note:
only the last two numbers can be modified.

Press K3 to confirm the modification and save the data; Press K4
to cancel the modification and return to the second step, and
“SET” stop flashing.

Press K4 two times and return to
“reading status”, year, month,
day, hour:minute will repeat in display ever 3 seconds.
4.5.2
”
Li hours ON
” time adjustment

When LCD displays time to be adjusted:: Press K3 for two times
and display
“SET”

Press K1 to display
“on hours” see following:

Press K3 for one time and
“SET” flash

Modify the hours between 1~12 by K1 and K2

Press K3 to confirm the modification and save the data; Press K4
to cancel the modification and return to the second step, and
“SET” stop flashing.

Press K4 for one time and turn to
“reading status”
4.5.3
”Exact time” adjustment

When LCD displays time to be adjusted:: Press K3 for one time
and turn to reading status for time.

Press K1,K2 and turn to the months of the first season.

Press K3 for one time and turn to the reading status for the first
season.

Press K1,K2, and will display the months of first season, ON 1
and OFF 1, ON 2 and OFF 2, the arrowhead of the below picture
shows the display order.

Press K
3, “SET” and H of H:M flashes, user can modify hours by
K1,K2

Press K3 to confirm the modification and save the data, and
return to the fourth step; Press K4 to cancel the modification and
return to the fourth step, and
“SET” stop flashing.
When modify Hour and Minute, H will be modified first. Press K3 and turn
to M modification. Press K3 again, confirm the modification and save the
data, and return to the fourth step; Press K4 to cancel the modification and
return to the fourth step, and
“SET” stop flashing.

Press K4 for two times, and turn to reading status.
The default time data is 0, and the controller will follow the last data setting.
The modification for the last month of the first season:

When displaying the first season, press K3 for one time and
“SET” flashing;

Adjust data for month between 1~12 by K1-K2

Press K3 to confirm or Press K4 to cancel.
“SET “ stop flashing,
return to the fourth step above.
Modification for H and M:

When LCD displays time to be adjusted:
Press K3, “SET” and H
of H:M flashes, user can modify hours

User can adjust data 0~23 by K1/K2

Press K3 again, save data of hours and then turn to modify
minute, “SET” and M of H:M flashes.
 User can adjust data 0~59 by K1/K2.
 Press K3 and save the modified data, if not saved, then press K4
to return select status-
“SET” not flash.
Note: the EXACT TIME Control can be divided to 4 seasons, for example:
1 is the season no. 3 is the last month of season.
Customers can also set 1-12, that means the whole year will have one
season, and the controller will work same during the whole season.