Page 5
EPS Stromversorgung GmbH
Alter Postweg 101 • 86159 Augsburg
Germany
Fon: +49 821 / 570451-0
Fax: +49 821 / 570451-25
www.eps-germany.de
PSB 9000 3U Slave Series
1.4
Disposal of equipment
A piece of equipment which is intended for disposal must, according to European laws and regulations (ElektroG,
WEEE) be returned to the manufacturer for scrapping, unless the person operating the piece of equipment or an-
other, delegated person is conducting the disposal. Our equipment falls under these regulations and is accordingly
marked with the following symbol:
1.5
Product key
Decoding of the product description on the label, using an example:
PSB 9 080 - 360 3U Slave
Construction:
Slave
= Ancillary unit for master-slave operation
3U
= 3 rack units of height
Maximum current of the device in Ampere
Maximum voltage of the device in Volt
Series:
9
= Series 9000
Type identification:
PSB
= Power Supply Bidirectional
1.6
Intended usage
The equipment is intended to be used, if a power supply or battery charger, only as a variable voltage and current
source, or, if an electronic load, only as a variable current sink.
Typical application for a power supply is DC supply to any relevant user, for a battery charger the charging of vari-
ous battery types and for electronic loads the replacement of an ohmic resistor by an adjustable DC current sink
in order to load relevant voltage and current sources of any type.
•
Claims of any sort due to damage caused by non-intended usage will not be accepted.
•
All damage caused by non-intended usage is solely the responsibility of the operator.
