ePropulsion Evo Dual, Руководство пользователя

Страница: 11 / 32

9
English
Button Function
SYNC
Synchronization
mode
1.When it is turned on, press SYNC button, beep once means
it is switched to synchronization mode and the SYNC button
light is on.
2.When it is in the synchronization mode, long press SYNC but-
ton, beep once and the DOCK button light blinks three times. It
means that it is switched to the mode that two machines are
controlled by right side throttle handle. Then long press SYNC
button again, beep once and it is switched to the mode that
two machines are controlled by left side throttle handle. These
two modes can be switched to each other.
When under the synchronization mode, the machines are
controlled by right side throttle handle by default.
DOCK
Dock mode
When it is turned on, press DOCK button, beep once and it is
switched to dock mode. The DOCK button light is on and the
power is limited to 50%.
2.4 Calibration
Calibration process Figure
Step 1: When the throttle handle is on the
zero position as shown in figure 2-3, long
press "NORM" button for 5 seconds to
enter calibration mode. Push the throttle
handle forward to the maximum position
as shown in figure 2-2, and press the
"NORM" button to confirm.
Push forward to the
end then press NORM
Step 2: Pull the throttle handle back to
the zero position as shown in figure 2-3,
and press the "NORM" button to confirm.
Pull to the neutral
then press NORM