Epple Maschinen SB 55 SV, Руководство пользователя

Страница: 11 / 37

Stand 26.11.08, SB 55 SV, Drills Page 11 of 37
1.4.4 The user must

Observe commands of superiors and sentinels

Do not remove safety equipment during work

Avoid contact with tool

Use personal protective equipment (incl. Skin protection)

Wear close work wear

Remove chips with equipment and not by hand

Do not use damaged thread, wood, HSS drills

Work parts have to be clamped safe and feast

Assure order and cleanness at the work place

Never work with damaged machine parts

Announce defects directly to your superior

Read and understood the user manual

To be familiar with all safety regulations and safety arrangements

Use the machine
1.4.5 Special claims to the qualification
For the work with electric units or operating materials more claims to the
qualification are efficient.
Only electronic experts are allowed to do work at electric units. If the
instruct and oversee you, you are allowed, too.
Before you accomplish work at electric units or operating material you
have to keep the following instructions in this order:

Disconnection

Assure against resetting

The unit must be de - energized
Please observe the effective regulations of the insurance association
and the accident prevention.
1.5 Operator position
The operator position is straight standing in front of the machine. Every other
position can lead to danger of personnel.
1.6 Safety equipment
The use of the machine is only allowed with correct functioning safety devices.
The machine is to decommission directly if a safety device is deficient of
effectless. Therefore you are responsible as an operator/ user. After response,
defect or falling out of a safety device, the profile roll may not be in use until:

The failure/ cause of the failure is abolished

You have checked the machine and fell confident that there is no danger
for personnel or property values