Epple Maschinen GB 33, Руководство пользователя

Страница: 49 / 52

Stand 02.01.09, GB 33, Geared head drill Page 49 of 52
17.2 Oil change
The gear of the new machine has to be emtyed and cleaned completely. You
can find the drain aperture at the lower side of the gear housing.
Afterwards you have to refill the gear; therefore use oil from the table below.
At the right sight is a show window, above a charging hole. Fill in oil until the
show window is covered up to the half.
The fill - up capacity is 0,4 kg gear oil, that is ca. 0,5 litre.
To advance the durability of the gear we advise a regular oil change.
Epple Maschinen © advises you oil from the following manufacturers:
Feed gear Driving gear
Required amount: ca. 0,5 L Required amount: ca. 4,5 L
B.P - ENEGROL HLP 68 (ISO)
B.P
– ENERAOL HP 100 OSON
SHELL
– TELLUS 68
SHELL
– VITARA 220
B.P - ENEGROL HLP 68 (ISO)
B.P
– ENERAOL HP 100 OSON
SHELL
– TELLUS 68
SHELL
– VITARA 220
Bare parts/ lubrication cup
MOBIL
– WAYOIL ISO UG68
Lubricant, acid
– free, commercial
Driving gear Feed gear