Assembly instructions
(
translation
)
HT / SHT Gearboxes
Doc. No.: 1001
Version 2 dated 21/01/2019
Page 11/15
can only be assured by the end product. Therefore, any commissioning
with overridden protection equipment of the machine is not permitted.
DANGER!
Death or extremely serious injury / crippling caused by equipment in
operation without suitable safety or protective devices by the surround-
ing end product.
7
Operation
CAUTION!
The gearbox may only be operated by accordingly qualified trained per-
sonnel.
The gearbox may only be operated with active protective and monitor-
ing equipment of the machine.
DANGER!
Death or extremely serious injury / crippling caused by equipment in
operation without suitable safety or protective devices by the surround-
ing end product.
WARNING!
Burns at hot surfaces.
During operation, the surface of the gearbox can reach high tempera-
tures. It must be ensured that there is no unintentional contact with the
surface of the gearbox.
During the operation, the gearbox should be observed.
Leakage, unusual temperature rises or an increase in the noise respec-
tively vibration indicate a fault which has to be repaired. If one of these
criteria should occur, the plant has to be shut down immediately. If the
fault
cannot
be
eliminated,
contact
EGT
Eppinger
(chapter 2.5).
